| Ford Mustang (fifth generation) |
|---|
 |
| Overview |
|---|
| Manufacturer | Ford |
|---|
| Production | 2004–2014 |
|---|
| Model years | 2005–2014 |
|---|
| Assembly | Flat Rock, Michigan |
|---|
| Designer | Sid Ramnarace (2002) |
|---|
| Body and chassis |
|---|
| Body style | 2-door convertible
2-door coupe |
|---|
| Layout | FR layout |
|---|
| Chronology |
|---|
| Predecessor | Ford Mustang (fourth generation) |
|---|
| Successor | Ford Mustang (sixth generation) |
|---|
The fifth-generation Ford Mustang is a pony car that was manufactured by Ford from 2004 to 2014, at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with the 2005 model year, and received a facelift for the 2010 model year. Originally designed by Sid Ramnarace through late 2001 and finalized in mid-2002, the fifth-generation Mustang's design was previewed by two preproduction concept cars that debuted at the 2003 North American International Auto Show. Development began on the S-197 program in 1999 under chief engineer Hau Thai-Tang, shortly after the 1998 launch of "New Edge" SN-95 facelift. From the second half of 1999, design work commenced under Ford design chief, J Mays, and concluded in July 2002 with the design freeze. There have been several variants of the fifth-generation Ford Mustang that include theMustang GT/California Special, Shelby Mustang, Bullitt Mustang, and Boss 302 Mustang.
Preproduction concepts
2003 Ford Mustang GT Concept, 2003 Mustang Convertible Concept
The fifth-generation Mustang convertible concept
Developed between February and November 2002, two pre-production concept cars, a convertible and coupe model, were presented by Ford at the 2003 North American International Auto Show on January 5, 2003.
The Redline Red Metallic Ford Mustang GT convertible concept included a "showbar" with a rim of billet-aluminum trim, 20-inch wheels, 13.8-in cross-drilled Brembo brakes, red and charcoal leather upholstery with perforated surfaces on the seat backs, billet-aluminum shifter for the 5-speed automatic transmission, as well as 4-point racing-style seatbelts and instrument gauges.
The Tungsten Silver Ford Mustang GT coupe concept included a glass roof and functional hood scoops, as well as a red and charcoal leather interior accented by billet-aluminum hardware and a supercharged MOD 4.6 L engine rated nearly 400 horsepower.
Appearing with other concept vehicles at the show such as the Cadillac Sixteen, Aston Martin V8 Vantage, and Dodge Tomahawk,AutoWeek called the concept the "most significant vehicle in show".
Both vehicles were eventually sold at the 2009 Barrett-Jackson Palm Beach auction for UD$175,000 each (before buyer premium).
S-197 concept
At the following year's North American International Auto Show, Ford introduced a redesigned Mustang previewed by the 2003 concept vehicle that was codenamed "S-197". Its platform was the D2C for the 2005 model year. Developed under the direction of Chief Engineer Hau Thai-Tang and exterior styling designer Sid Ramnarace, the fifth generation Mustang drew inspiration from the first-generation 1964-1970 Mustangs. The design aesthetic of J Mays, Ford's Senior Vice President of Design, has been described as "retro-futurism."
Initial release
Mustang
| 2005–2009 Mustang |
|---|
 |
| Overview |
|---|
| Production | September 2004–2008 |
|---|
| Model years | 2005–2009 |
|---|
| Designer | Doug Gaffka (S-197 design chief: 2000-01)
Larry Erickson (S-197 design chief 2001-04)
Sid Ramnarace (S-197 exterior: 2001)
Kevin George (S-197 interior: 2001)
Doug Gaffka (Bullitt: 2006) |
|---|
| Body and chassis |
|---|
| Body style | Coupé
Convertible |
|---|
| Powertrain |
|---|
| Engine | 4.0 L (245 CID) Cologne V6
4.6 L (281 CID) Modular V8
5.4 L (330 CID) ModularSupercharged V8 |
|---|
| Transmission | 5-speed manual (T-5, TR-3650)
6-speed manual (TR-6060)
5-speed automatic (5R55S) |
|---|
| Dimensions |
|---|
| Wheelbase | 107.1 in (2,720 mm) |
|---|
| Length | 187.6 in (4,770 mm) |
|---|
| Width | 73.8 in (1,870 mm) |
|---|
| Height | 54.5 in (1,380 mm) |
|---|
| Curb weight | V6 coupe MT/AT:
3,350 lb (1,520 kg)/3,420 lb (1,551 kg)
V6 convertible MT/AT:
3,475 lb (1,576 kg)/3,555 lb (1,613 kg)
V8 coupe MT/AT:
3,480 lb (1,579 kg)/3,525 lb (1,599 kg)
V8 convertible MT/AT:
3,610 lb (1,637 kg)/3,655 lb (1,658 kg)
GT500 coupe:
3,950 lb (1,792 kg)
GT500 convertible:
4,040 lb (1,833 kg) |
|---|
| Chronology |
|---|
| Predecessor | 1999–2004 Mustang (SN-95 II) |
|---|
| Successor | 2010–2014 Mustang (S-197 II) |
|---|
2005–2009 Ford Mustang V6 convertible
Production start-up for the 2005 Mustang was on September 7, 2004, with the first 2005 model rolling off Flat Rock Assembly on September 27, 2004. U.S. market launch and customer delivery began at the end of October 2004, with production ending in late 2008 for the 2009 model. The 2005–2009 base Mustang was powered by Ford's cast iron block 4.0 L Cologne SOHC V6, replacing the 3.8 L Essex OHV V6 used in 2004 and older models. It produces 210 hp (157 kW) at 5300 rpm and 240 lb·ft (325 N·m) of torque at 3500 rpm and was mated to a standard Tremec T-5 5-speed manual transmission with Ford's 5R55S 5-speed automatic transmission available as an option. A 3.31:1 final drive ratio is standard with either transmission. In a comparison test with a Pontiac G6 Convertible conducted byMotor Trend magazine, a Mustang V6 convertible equipped with an automatic transmission was able to accelerate from zero to 60 miles per hour (97 km/h) in 7.3 seconds; 1.4 seconds better than the 2006 Pontiac G6 convertible.
The Mustang has a MacPherson-strut front suspension with reverse "L" lower control arms. The rear suspension was a new three-link system with a Panhard Rod that controls the vertical and lateral movements of the axle. This live axle rear suspension, while sacrificing handling, provides the benefits of reduced cost and weight over heavier, more expensiveindependent rear suspensions. In spite of this, Ford has drawn heavy criticism from the automotive journalism community for the decision to equip the 5th generation Mustang with the live axle system. At a press conference, Ford stated that to include an independent rear suspension would have added $5,000 to the showroom price of the car.
Standard equipment on the 2005 Mustang included power windows, dual power mirrors, power door locks with remote keyless entry, front air bags, AM/FM stereo with CD player, 16-inch painted aluminum wheels, and larger brake discs than the previous generation Mustang with twin-piston calipers in the front. Some of the options available included Ford's MyColor (a color-configurable instrument cluster available as part of the Interior Upgrade Package), brushed aluminum panels (also part of the Interior Upgrade Package), Ford's Shaker 500 (500 watt peak output) or Shaker 1000 (1000 watt peak output) premium audio system with a 6-disc MP3-compatible CD changer, leather seating surfaces, a six-way power adjustable driver seat, and a four-channel anti-lock brake system with traction control (standard on GT models). All Mustang GT and Convertibles came with a rear sway bar with white links during these years; the bar diameter varied with options and was 18 mm, 19 mm, 20 mm, or 22.4 mm. Replacement links from Ford are colored black or oxide coated
As of 2007, all 2008 Mustangs have seats containing material derived from soy beans, harking back to some of Henry Ford'sideals.
Ford Sync was available on the 2009 model only as a dealer-installed kit.
Several new options and standard features were introduced in the following years, including the Pony Package (2005), a DVD-based GPS navigation system made by Pioneer (2006, late availability), a power passenger seat (2006), heated seats (2006),Sirius Satellite Radio (2006), new flat bottom spoiler for V6 only (2006), standard side airbags (2007), HID headlamps (2007), and ambient interior lighting (2007). The ambient interior lighting package consisted of the installation of electroluminescencethat gave the driver the ability to choose various color combinations for the instrument cluster, sound system and climate control displays, as well as light emitting from the top of the front footwells and from beneath the rear seats.
For 2009, Ford introduced a new option called the glass roof. This option ($1,995 at introduction) was in effect a full roof sunroof that splits the difference in price and purpose of the coupe and convertible models.
Pony Package
2007 Ford Mustang V6 coupe with Pony Package
The Pony Package for the V6 Mustang became available starting in 2006. This option includes an upgraded suspension derived from the Mustang GT, 17-inch wheels with wider tires (originally only available on the GT), a unique grille design with fog lamps, a rear deck spoiler, and unique door striping and emblems. Later versions of the pony package also included a stainless-steel exhaust and power driver's seat.
V6 Appearance Package
At the 2007 SEMA show in Las Vegas, Ford Custom Accessories introduced the V6 Appearance Package. Among the items were a billet grille, scoops, a spoiler and blackout trim treatments. This package includes an upgraded suspension, additional interior trim, and a grille with foglights. Available in 2008 as a $2,398 option, it was promoted with an additional Power Pack FR1 (an 85 mm Cold Air Intake sourced from the Bullitt, True Dual exhaust with a X-pipe and Bullitt Mufflers, a Pro-Cal Hand held tuner and a Ford Racing Performance oil filter), handling package FR3 (shocks/struts, front and rear anti-rollbars, V6 lowering springs, and a V6 strut tower bar) and a short throw shifter. Available in 2008, the V6 Appearance Package was only available on the V6 Coupe with the Premium Package with either an automatic or manual transmission and only with Grabber Orange, Vapor Silver Metallic, and Dark Candy Apple Red. For 2009 the V6 Appearance Package was offered in Performance White and Black. By 2008, total of 152 V6 Appearance Packages were built and only 96 by 2009.
Mustang GT
2005–2009 Ford Mustang GT convertible
The Mustang GT featured an all-aluminum 4.6 L 3-valve SOHC Modular V8 with variable camshaft timing and a more rugged TremecTR-3650 transmission. The engine produces 300 hp (224 kW) @ 5750 rpm and 320 lb·ft (433 N·m) of torque @ 4500 rpm. The GT model was capable of performing a quarter-mile test in 12.8 seconds @ 108 MPH, with acceleration from zero to 60 MPH in 4.6 seconds. The Mustang GT also came equipped with a limited slip differential complete with the same carbon-fiber clutch discs used in the 2003 to 2004 SVT Cobra and the 2007 Shelby GT500. The differential uses the 31-spline axles and the 8.8 in (224 mm) ring gear. The standard final drive ratio of 2005 and 2006 Mustang GTs with a manual transmission was 3.55:1. Since the 2007 model year, a 3.31:1 ratio final drive was standard with the 3.55:1 gearing available as a factory installed option. Automatic transmission-equipped models of all years come with 3.31:1 ratio.
The Mustang GT features a stiffer, better handling version of the standard suspension, larger 12.4-inch front brake discs (versus the 11.4-inch discs used on V6 Mustangs), standard four-channel ABS with traction control, a two-piece drive shaft, a stainless steel dual exhaust, standard grille-mounted fog lights, and 17-inch wheels with optional 18-inch wheels.
Shelby GT and GT-H
The 2006 Shelby GT-H and later Shelby GT were based on the standard GT model, but modified by Carroll Shelby International to produce 319 hp (238 kW) by means of a Ford Racing air intake, performance tune, and upgraded exhaust system.
The Shelby GT-H was a fleet vehicle for Hertz car rental outlets and traced its roots to the 1966 Shelby GT350H. The GT-H was available only in Hertz's corporate colors: black exterior and twin gold racing stripes. It included a billet aluminum grille, a Shelby hood with functional hood pins, as well as front and rear fascias that were later used on Shelby GT and GT/CS models. The GT-H came with the Power Pack that included a cold air intake, revised exhaust system and custom performance calibration, boosting power to 319 hp (238 kW) and torque to 330 lb·ft (447 N·m). The GT-H also includes the handling package with lowering springs, improved dampers, sway bars, a strut tower brace and a 3.55:1 ratio rear axle assembly. A total of 500 units were ordered by Hertz for the 2006 model year, and 500 convertible models were announced for 2008.
GT California Special
In 2006, Ford introduced the GT California Special (GT/CS) package, hearkening back to the original 1968 California Special Mustang. The package adds 18" polished aluminum wheels, non-functional side scoops, and unique vinyl striping that replaced the side GT emblems. The GT/CS also included a different front fascia and rear valance with diffuser, similar to those found on the Shelby GT. The GT/CS edition's front fascia was 1.5 inches lower to the ground than the standard GT. Interior upgrades included Mustang labeled floor mats, and CS only leather interior color options. The 2007 GT Appearance Package adds a hood scoop, exhaust tips, and engine cover.
In 2010, the GT California Special was re-introduced as optional on the Mustang GT. Black GTCS side stripes which faded into a side scoop. The front fascia was replaced with the one used in the 2011 Boss 302 with working lower fascia fog lights. The rear diffuser was taken from the Shelby GT 500 while the rear deck lid featured black vinyl and a wing spoiler. Wheels were argent spoke 19 inch with a GT logo stamped towards the outer rim on each wheel. The interior's bright dash was replaced with black carbon fiber treatment, while carbon fiber door inserts and seat leather patterns were added. Badging included "GTCS" on the carbon fiber dash and floor mats. The front Grill was brushed aluminum billet with a V6 style pony emblem on the drivers side. (for 2012, it was changed to black billet). Rear axle gear selections were 3.31, 3.55, or 3.73.
2008 and 2009 Bullitt
2008 Ford Mustang Bullitt
The Mustang Bullitt returned in February 2008, a variant of the Mustang GT, the last version of which was produced in 2001. It is reminiscent of the Dark Highland Green GT-390 fastback Mustang driven by Steve McQueen in the 1968 film Bullitt. Available in Dark Highland Green or Black exterior paint without spoiler and GT fender emblems; the faux gas cap on the deck lid is replaced by a unique Bullitt version. The Mustang GT's standard fog light-equipped grille is replaced with a specially designed pony-less style grille highlighted by an aluminium accent. Dark Argent Gray 18-inch cast-aluminum euro-flange wheels are used with matching brake calipers and larger, 3.5 inch exhaust tips replace the Mustang GT's standard 3 inch tips. Although side (quarter) window louvers (as shown in picture) are not standard, they are added by owners because they are similar to those on the 1968 Mustang fastback.
The Bullitt uses a version of the Mustang GT's aluminum 4.6 L SOHC V8. It has a cold air intake, improved engine calibration, and a revised exhaust system designed to mimic the sound of the Mustang used in the Bullitt movie. Total output is 315 hp (235 kW) @ 6000 rpm and 325 lb·ft (440 N·m) of torque @ 4250 rpm and the engine's redline has been raised to 6500 rpm (from the standard Mustang GT's 6250 rpm). Premium grade, 91-octane or better gasoline is recommended, although an adaptive spark ignition system allows the engine to accept regular grade gasoline. Total output is the same with either fuel, but the engine delivers a flatter torque curve when using premium. The Tremec TR3650 5-speed manual transmission from the Mustang GT is used, but the Bullitt featured a heavier duty rear axle (also used in GT500KR) with 3.73:1 ratio, versus the Mustang GT's 3.31:1 or optional 3:55:1 ratios. The suspension is improved over the standard GT utilizing stiffer springs, struts, and a decorative front strut tower brace while also lowering the car's ride height by six millimeters. Most of the Mustang Bullitt's components are available in the aftermarket for retrofitting earlier S197 Mustang GT vehicles, but some parts used in Bullitt Mustangs are marked to show authenticity.
The 2009 Mustang catalog indicate the Bullitt package was available on manual transmission Mustang GT Premium coupes as a regular production option; the same color restrictions apply.
45th Anniversary Edition (2009 GT)
2009 Mustang GT 45th Anniversary Badge
2009 Mustang GT 45th Anniversary Edition (with custom quarter window louvers)
Features of the 2009 Mustang include a glass top roof option, as well as special 45th Anniversary badging to commemorate the original Mustang's launch in 1964. A total of 46,420 were built.Satellite radio was standard on premium interior models, and Deluxe was no longer used to identify base models. This model has the same engine and functional equipment as a basic GT. The 2009 45th Anniversary edition is badged with a Mustang Colt emblem, with the 45th Anniversary logo. It included with an optional hood scoop and polished stainless steel exhaust tips package, rear spoiler, the Ambient Lighting package was now standard and included with the price of the vehicle at no additional cost, and 17" polished aluminum wheels were optional (17" wheels were standard but this model year used the same silver 5 spoke wheels since 2007).
Iacocca Silver 45th Anniversary Edition (2009½ GT)
The 2009 Iacocca Silver 45th Anniversary Edition was a 45 unit production also commemorating the 45th anniversary of Ford Mustang. Named forLee Iacocca who helped develop and introduce the Mustang. It was designed by Michael Leone (I Legacy & Michael Leone Design) and built by California-based Gaffoglio Family Metalcrafters coachbuilding company. Despite its aftermarket build status, it carries factory engine and warranties. Iacocca was given car 1 of the 45. One was later auctioned for $352,000.
Shelby GT500 (2007–2009)
For 2007, Ford's Special Vehicle Team launched Shelby GT500, a successor to the 2003/2004 Mustang SVT Cobra. The GT500 shared basic design characteristics with that of the Mustang V6 and GT. It retained the same basic live axle rear suspension setup of the Mustang V6 and GT, with some minor durability enhancements such as thicker sheetmetal supports and extra welds, as well as redesigned strut towers to accommodate a wider engine. The supercharged 5.4 L 32-valve DOHC V8 engine with an iron block and aluminum heads was rated at 500 hp (373 kW) @ 6000 rpm and 480 lb·ft (650 N·m) of torque @ 4500 rpm. The Tremec TR6060 6-speed manual transmission used a 3.31:1 rear drive ratio. Wheels are 18×9.5 inch with P255/45ZR18 tires in the front and P285/40ZR18 tires in the rear. Brembo 14-inch disc brakes with aluminum four-piston calipers are on the front with 11.8-inch disc brakes with single-piston calipers in the rear.
The GT500 failed to meet some automotive journalist's expectations. Car and Driver magazine, for example, though praising the GT500 for its ample horsepower and relatively smooth ride, criticized their test car for its heavy weight and, in particular, the nose-heavy weight distribution of 57.7% front and 42.3% rear (compared to the 52.5% front, 47.5% rear of a Mustang GT manual they tested). Nevertheless, in spite of their opinion of its drawbacks, Car and Driver drove a GT500 in their 2007 "Lightning Lap" road test at Virginia International Raceway and found that the car's on-track performance lap time of 3:05.9 fell just below that of the Porsche 911 Turbo (3:05.8) and faster than that of the Lotus Elise (3:09.3), Porsche Cayman S (3:09.5) and BMW M6 (3:10.0).
Shelby GT500KR
Debuting as a 2008 model and continuing for 2009, the Shelby GT500KR ("KR" being an abbreviation for "King of the Road") pays homage to the original 1968 Shelby Mustang of the same name. Production for '08 was limited to 1011 units (including prototypes), with another 712 KR models built for '09. The KR featured new components and performance enhancements over the standard GT500. The KR's engine was tuned to produce 540 hp (403 kW) @ 6250 rpm and 510 lb·ft (691 N·m) of torque @ 4500 rpm, gains of 40 hp and 30 lb·ft of torque, respectively over the GT500's. The rear axle has a 3.73:1 ratio. To improve handling and help offset the car's front-heavy weight distribution, the GT500KR featured a Ford Racing strut tower brace and uniquely tuned struts, shocks, and springs. Using a carbon fiber hood and a revised exhaust system, the overall weight of the GT500KR was 22 lbs lighter than a standard GT500.
Engines
|
| Mustang (4.0 L V6) | 2005-2010 | 210 hp (157 kW)@5300, 240 lb·ft (325 N·m)@3500 |
| Mustang GT (4.6 L V8) | 2005-2009 | 300 hp (224 kW)@5750, 320 lb·ft (434 N·m)@4500 |
| Shelby GT500 (5.4 L SC V8) | 2007-2009 | 500 hp (373 kW)@6000, 480 lb·ft (651 N·m)@4500 |
| Mustang Bullitt (4.6 L V8) | 2008-2009 | 315 hp (235 kW)@6000, 325 lb·ft (441 N·m)@4250 |
Motorsports
In autocross, the S197 Shelby GT Mustang won the SCCA Pro Solo championship in the F-stock class from 2007 to 2009.
A Mustang won the drivers, team and manufacturers' championships for both the 2008 and 2009 seasons of Grand-Am Koni Challenge.
In 2009, the Mustang also won the SCCA Pro Racing World Challenge GT title. Blackforest Motorsports has entered a Mustang in the Rolex Sports Car Series GT class.
2010 model year update
2010 Mustang
| 2010–2014 Mustang |
|---|
 |
| Overview |
|---|
| Production | January 12, 2009–June 20, 2014 |
|---|
| Model years | 2010–2014 |
|---|
| Assembly | Flat Rock, Michigan, United States |
|---|
| Designer | Doug Gaffka (S-197 II design chief: 2006)
George Saridikas (exterior: 2006)
Robert Gelardi (interior: 2006, MY2013 facelift exterior: 2010) |
|---|
| Body and chassis |
|---|
| Body style | Coupé
Convertible |
|---|
| Powertrain |
|---|
| Engine | 3.7 L Duratec V6
4.0 L Cologne V6 (2010 Only)
4.6 L Modular V8 (2010 Only)
5.4 L Modular supercharged V8
5.0 L Coyote V8
5.8 L Modular supercharged V8 |
|---|
| Transmission | 5-speed manual (TR-3650)
6-speed manual (TR-6060, Getrag/ Ford MT82)
5-speed automatic (5R55S)
6-Speed (6R80) Automatic |
|---|
| Dimensions |
|---|
| Wheelbase | 107.1 in (2,720 mm) |
|---|
| Length | 188.1 in (4,780 mm) |
|---|
| Width | 73.9 in (1,880 mm) |
|---|
| Height | 55.6 in (1,410 mm) (Coupe) 56.1 in (1,420 mm) (Convertible) |
|---|
| Curb weight | V6 coupe MT/AT:
3,401 lb (1,543 kg)/3,454 lb (1,567 kg)
V8 GT coupe MT/AT:
3,533 lb (1,603 kg)/3,575 lb (1,622 kg)
V8 GT500 coupe MT:
3,852 lb (1,747 kg) |
|---|
| Chronology |
|---|
| Predecessor | 2005–2009 Mustang (S-197 I) |
|---|
| Successor | 2015–present Mustang (S550) |
|---|
The 2010 model year Mustang was unveiled on November 18, 2008, prior to the Los Angeles International Auto Show. Production began on January 12, 2009 and it went on sale in March 2009. The 2010 Mustang was a revision of the 2005–2009 models, retaining the D2C platform. Design and development work began in 2005, with 2006 being the year when designer George Saridikas' exterior proposal was chosen, as well as Robert Gelardi's interior proposal under chief S-197 designer Doug Gaffka. Doug Gaffka afterward, became immediately responsible for the design of the 2008–2009 Bullitt and the GT500KR, upon MY2010 design selection in 2006. The resulting production exterior design of late 2006 was substantially revised, resulting in better aerodynamic performance (Ford claimed the coefficient of drag was reduced by 4% on V6 models and 7% on GT models, and that the front aerodynamic lift was reduced by 37% for V6 models and 23% for GT models.). Specific changes to the exterior include a restyled Mustang emblem, a new headlight design with integrated turn signals, new slimmer side mirror design, a prominent "powerdome" hood, and revised three-lens taillights with LEDs that blink in sequence for turn indication. Additionally, the 2010 Mustang GT used smaller fog lights than the 2005–2009 models though they were still mounted in the car's grille. Fog lights on V6 models (a part of a revised Pony Package first introduced for 2006) are now mounted in the lower fascia below the grille. The radio antenna had been moved to the rear of the car and the lock for the trunk no longer featured a keyhole on the trunk lid, substituting with a remote trunk release only. In spite of its changes, the 2010 Mustang's overall exterior dimensions were nearly identical to the 2005–2009 models.
The Mustang's interior was revised featuring higher quality thermoplastic olefin surfaces, available real aluminium trim, and improved fit and finish. The new design moved away from the linear nature of the previous models. Ford SYNC became available as a factory installed option on all trim levels of the Mustang except the base model.
This generation was the first to be sold in Japan in left hand drive form with exterior lighting modifications to comply with Japanese Government regulations.
Japanese-market Mustang with deleted
side marker lights, amber rather than red rear
turn signal, and side turn signal repeater on front fender.
The standard engine was a 4.0 L V6 mated to a 5-speed manual transmission or an optional 5-speed automatic transmission. The V6 powertrains were unchanged from those used in 2005–2009 Mustangs. Though the 2010 Mustang V-6 retained a single exhaust outlet, the diameter of the tip had been increased one-half of an inch to three inches. The 2010 Mustang included new spring rates and dampers to improve ride quality and control and Ford's AdvanceTrac traction and stability control system standard. Newly standard on the base Mustang were 17-inch painted aluminum wheels while 18-inch wheels continue to be optional (except for V8 models, where 18-inch wheels were mounted by default). Other new available features and options for the 2010 Mustang included Ford SYNC, dual-zone automatic climate control, an updated navigation system with Sirius Travel Link, a capless fuel filler, a reverse camera system to aid in backing up, and an updated version of the V6 Pony Package.
2011 and 2012 Mustang
For 2011, the aging 4.0 L V6 used in the Mustang since the 2005 model year was replaced with Ford's Duratec 37 3.7 L DOHC V6. Unlike earlier versions of the engine, the new V6 featured Twin-independent Variable Cam Timing (Ti-VCT), true dual exhaust (compared to the single outlet exhaust for the previous 4.0 L V6); this engine was rated to produce a much-improved 305 bhp (227 kW) @ 6500rpm and 280 lb·ft (380 N·m) of torque @ 4250rpm.
The upgraded powertrains were capable of achieving better fuel efficiency due in part to the new transmissions. With the standard Getrag MT82 6-speed manual transmission co-developed with Ford, the Mustang had been rated by the EPA to achieve 19 mpg-US (12 L/100 km; 23 mpg-imp) in city driving and 29 mpg-US (8.1 L/100 km; 35 mpg-imp) on the highway. The newly optional Ford 6R60 6-speed automatic achieved 19 mpg-US (12 L/100 km; 23 mpg-imp) in city and 31 mpg-US (7.6 L/100 km; 37 mpg-imp) on the highway. A newly standard 2.73:1 limited slip rear axle was more fuel efficient compared to the more aggressive 3.31:1 axle used previously. The 3.31:1 axle remained available in the 2011 Mustang as a performance option.
The 2011 Mustang offered a V6 Performance Package starting in the summer of 2010. The package featured a standard 3.31:1 rear axle, stiffer suspension tuning, 19-inch wheels with performance tires, a strut tower brace, and performance-oriented electronic stability control calibration.
Other, non-powertrain related upgrades made to the 2011 Mustang included a Nexteer Automotive Electric Power Steering (EPS) system with pull-drift compensation and active nibble control, general aerodynamic and NVH improvements over the 2010 Mustang, a digital message/information center, blind spot mirrors integrated into the car's side mirrors, a universal garage door opener, a 160 mph speedometer, and Ford's MyKey programmable vehicle key technology.
2012 Mustang Cobra Jet
A special production Mustang named the Cobra Jet (based on a model from the 1960s and 1970s) was also built and sold by Ford, in limited quantities of 50 units. The car is not street legal, however was still classified as a production car. A drag racer took his completely stock car and recorded a 0-60 of 1.52 seconds and a 0-100 of 3.26 seconds, and made a 1/4 mile pass of 7.848 seconds @ 174.4 mph, crowning the Mustang Cobra Jet as the world's fastest accelerating production car, smashing the Bugatti Veyron and Ariel Atom V8 by nearly a full second in both categories. The car was introduced in 2008, and utilized a supercharged version of Ford's 5.4L Modular V8. 2013 and up models used a version of Ford's Coyote 5.0L engine. Both engines could be bought in naturally aspirated or supercharged versions, producing anywhere from 430-800 horsepower stock and weighing in at 3,500 lbs. The car also used a special race built C4 automatic 3 speed transmission, a transmission that was introduced in the 1960s with the original Mustang. The rear axle was also a rather famous one, as it was the Ford 9" rear axle used in so many applications over the years.
2013 Mustang
2013 Ford Mustang GT 5.0 coupe
Between 2009 and 2010, development took place on further updates to the second generation S-197. In late 2010 design work (by Robert Gelardi) was frozen, with prototypes being first spotted in May 2011. On November 2, 2011, Ford unveiled the 2013 model year Mustang. The 2013 model year Mustang exterior was updated with a new front fascia featuring a larger grille, standard HID headlamps and two LED accent strips adjacent to the headlamp lens. Models equipped with the Pony Package offered LED lighting mounted on the sideview mirrors that produce a projection of a running horse on the ground, 18" wheels, and lower valence foglamps. In the rear, LED tail lamp clusters included sequential turn signals (as with 2010-2012 Mustangs) and a reverse indicator light integrated within the brake light. The trunk lid included a black panel that united the left and right tail lamp clusters. Several new wheel designs were offered.
Inside, Ford now offered a 4.2" display between the speedometer and tachometer on Premium models. Selections in this information display included G-force, acceleration times, air-fuel ratio, cylinder head temperature, and oil temperature. All models equipped with the 6-speed automatic transmission included a SelectShift feature, which provided drivers the ability to choose and hold a gear and to shift manually.
Mustang GT
2010
The 2010 Mustang GT added a more powerful version of the
4.6 L V8 seen in 2005–2009 Mustang GTs. The 2010 Mustang GT's revised V8 produced 315 bhp (235 kW) @ 6000rpm and 325 lb·ft (441 N·m) of torque @ 4250rpm. The 5-speed manual and automatic transmissions offered with the updated V8 continued unchanged from before. The size of the 2010 Mustang GT's dual exhaust tips had been increased by one-half of an inch to 3.5 inches while the exhaust note has been improved to enhance the sound of the V8. Like the base V6-equipped Mustang, the 2010 Mustang GT included new spring rates and dampers to improve ride quality and control. AdvanceTrac was also standard in the Mustang GT though a special
Sport Mode setting was added for spirited driving. The 2010 Mustang GT came with standard 18-inch wheels – one inch greater than the previous Mustang GT's standard wheels – while 19-inch wheels were a new option.
Newly available for the Mustang GT for 2010 were two performance packages. The
3.73 Axle Package featured higher performance front brake pads, a more aggressive 3.73:1 rear axle, and a recalibrated AdvanceTrac system. The
Track Package featured higher performance front and rear brake pads, stabilizer bars and rear lower control arms from the GT500, uniquely tuned shocks and struts,
Pirelli summer tires (includes automatic upgrade to 19-inch wheels), a 3.73:1 rear axle with carbon plates in the differential, and a recalibrated AdvanceTrac system.
2011 and 2012
Starting in late 2010 (for the 2011 model year), the Mustang GT's engine was an all-aluminum 32-valve 5.0 L DOHC V8, codenamed Coyote. The 2011 Mustang GT marked the engine's first use in any production Ford. While the new engine's displacement was similar to Ford's original "5.0" 4.9 L (302 cu in) V8, it was an unrelated design and instead shared more in common with the 4.6 L V8 and other Modular engines that it replaced. The new 5.0 used a DOHC head design like other Modular engines and even shared its bore spacing and deck height with the outgoing 4.6 L V8. Differing the new engine from earlier Modular engines, among other features, was its use of wider bore diameters (and a longer stroke relative to the 4.6 L V8 in particular), to allow the use of larger valves, and camshaft torque-actuated Twin-independent Variable Cam Timing (Ti-VCT). This more advanced design is approximately 430 lb (195 kg) – about10 lb (5 kg) heavier than the Mustang GT's previous 4.6 L V8. Red-line had been raised to 7,000 rpm. Using premium grade, 91-octane or better gasoline, the new 5.0 L V8 could produce 412 bhp (307 kW) @ 6500rpm and 390 lb·ft (529 N·m) of torque @ 4250rpm. Output of the 5.0 drops to 402 bhp (300 kW) @ 6500rpm and 377 lb·ft (511 N·m) of torque @ 4250rpm when regular grade gasoline is used.
The new 5.0 incorporates piston cooling oil jets that helped warm the engine faster and keep the engine running cooler under load. Racing style tubular headers replaced the standard cast iron headers. Coolant and oil flow patterns were optimized for proper flow when under high lateral forces, such as those experienced when on a road course track.
The Mustang GT also got new transmissions for 2011. Both transmissions were heavier duty versions of the same designs offered with the V6 Mustang; a Getrag/Ford MT82 6-speed manual transmission and Ford's 6R80 6-speed automatic transmission. The 6-speed manual transmission came with a 3.31:1 rear axle while 6-speed automatics get a taller 3.15:1 rear axle. Combined with its new, more efficient V8, the new 6-speed transmissions contributed to an improvement in fuel economy in the 2011 Mustang GT over its counterpart from the 2010 model year. As certified by the EPA, manual transmission models were able to achieve 17 mpg-US (14 L/100 km; 20 mpg-imp) in city and 26 mpg-US(9.0 L/100 km; 31 mpg-imp) on the highway while automatic transmission models were able to achieve 18 mpg-US (13 L/100 km; 22 mpg-imp) in city and 25 mpg-US (9.4 L/100 km; 30 mpg-imp) on the highway.
The Mustang GT gained the same non-powertrain related upgrades that standard V6 Mustangs got for 2011. Other, new features exclusive to the 2011 Mustang GT included "5.0" fender badges replacing the "GT" badges used previously, an optional Brembo Brake Package includes 14 inch Brembo front disk brakes taken from the Shelby GT500, unique 19-inch wheels with Pirelli P-Zero ultra high performance summer only tires, a unique calibration of the Advanced Track stability system including a "sport" mode, and suspension enhancements such as stiffer springs (less aggressive than the BOSS 302 and Shelby models but more so than the regular GT models) and various other suspension enhancements. Convertible versions of the Mustang GT in particular received a front strut tower brace, stiffened crossmembers, and other enhancements resulting in a 12% increase in structural rigidity compared to 2010 Mustang GT convertibles. All 2011 Mustang GT's with 19 inch wheels (brembo brake equipped, California special, etc.) also received the strut tower brace and stiffened cross members.
Taller rear head rests were added in the middle of the 2012 model year for whip-lash protection, with fold down feature for visibility when rear passengers are not present. The rear fascia is altered for slightly better aerodynamics than the 2010 as well.
'High Gear' concept (2012)
A concept car designed by Jennifer Seely of Ford, based on 2013 Ford Mustang GT. The design was inspired by international products in categories such as jewelry, couture clothing, and architecture. The vehicle included rose-gold chrome accents throughout the exterior and interior; satin-black body; quilted suede seats with leather-wrapped interior upholstery. Modifications will also be made to the engine, undercarriage, drivetrain, and sound system. The vehicle was unveiled in 2012 SEMA show, during the first SEMA Mustang Build Powered by Women event.
2013
Changes for the 2013 model year included standard "blacked out" tail lights and a front fascia similar to the styling of the Shelby GT500 models. The GT models include LED fog lights mounted in the grille and functional heat extractors on the sides of the hood. The engine gained 8 horsepower (6 kW) for a total of 420.
A new Track Package was offered for manual transmission GT Coupes.
GT Track Package included the complete Brembo Brake package, a 3.73:1 Torsen helical cut limited slip differential, Boss 302 aluminum radiator, Boss 302 engine oil cooler, and numerous suspension changes.
Recaro sport seat option added for the Coupe.
U.S. Air Force Thunderbirds Edition 2014 Ford Mustang GT (2013)
It was a version of 2014 Ford Mustang GT coupe (VIN 0001) commemorating the 60th anniversary of the U.S. Air Force Thunderbirds, with white body colour with red and blue accents, USAF markings and logos, wide body modifications, a handcrafted and painted belly pan by Creations n' Chrome that emulated the F-16 Thunderbird appearance, front and rear wide body elements by TS Designs, custom 22-inch wheels by Forgiato, a modified navigation screen, instrument cluster, removal of and rear seat, Recaro seats with embroidered Thunderbirds elements, unique sill plates and puddle lamps, a Ford Racing supercharger, suspension handling pack, Brembo brakes.
The vehicle was sold at the Gathering of Eagles charity event during the Experimental Aircraft Association (EAA) AirVenture Oshkosh 2013. The vehicle was purchased by James Slattery of San Diego, California for USD $398,000.
Mustang Boss 302
| 2012 Boss 302 |
|---|
 |
| Overview |
|---|
| Production | 2011–2013 |
|---|
| Assembly | AutoAlliance International (Flat Rock, Michigan, USA) |
|---|
| Designer | Robert Gelardi (2009)
Melvin Betancourt (facelift: 2010) |
|---|
| Body and chassis |
|---|
| Body style | 2-door coupe |
|---|
| Platform | 5th Generation Mustang |
|---|
| Powertrain |
|---|
| Engine | 5.0 L V8 |
|---|
| Transmission | 6-speed manual |
|---|
| Dimensions |
|---|
| Wheelbase | 107.1 in (2,720 mm) |
|---|
| Length | 188.1 in (4,780 mm) |
|---|
| Width | 73.9 in (1,880 mm) |
|---|
| Height | 55.6 in (1,410 mm) (Coupe) |
|---|
| Curb weight | 3,631 lb (1,647 kg) |
|---|
Ford revived the Boss 302 nameplate for 2012. The standard 2011 Ford Mustang GT’s 5.0-liter V8 is enhanced with an upgraded intake system, forged rotating assembly, CNC ported heads, revised camshafts and a high flow "runners in the box" intake taken from the 302R racecar. It produces 444 horsepower – a 32 hp (24 kW) over the standard GT’s 412 hp (307 kW). The engine loses about 10 lb·ft (14 N·m) of torque at peak when compared to the standard GT. It is rated at 380 lb·ft (515 N·m). and comes with a six-speed MT-82 manual transmission. A 3.73 rear axle uses carbon fiber plates in its limited slip differential or an optional Torsen differential. While the quad exhaust system made up of two standard Mustang GT outlets and two side pipes that exit on either side of the rear crossover. The side pipes send the exhaust through a set of metal "Attenuation" discs to create an extra growling exhaust sound. The discs are removable and include a spacer plate sized to match aftermarket exhaust dump valves.
The Boss 302 takes the Mustang GT’s suspension and adds higher-rate coil springs, stiffer bushings, and a larger diameter rear stabilizer bar. The body is lowered 11 mm (0.4 in) up front and just 1 mm (0.0 in) in the rear to give it a more raked stance designed to recall the original. The shocks are adjustable at the shock tower by using a flat head screwdriver. The standard Mustang traction and stability control programs have been altered with a new intermediate sport mode designed to allow for more flexibility on the track.
The aero package is almost entirely copied from the Boss 302R race car. The 19-inch black-alloy racing wheels are 9-inches wide up front and 9.5-inches out back and come within Pirelli P-Zero tires.
Boss 302 Laguna Seca edition
Laguna Seca edition has map of track on rear badge
The Boss 302 Laguna Seca edition is a further upgraded version of the Boss 302. Additions include Recaro sport seats, a Torsen limited-slip rear differential (both optional on the standard Boss 302), revised suspension tuning with unique spring and damper rates, and a larger rear stabilizer. The Laguna Seca model loses its rear seats, which are replaced by a cross-car X-brace to increase structural rigidity approximately 10%. It rides on 19X9-inch front and 19X10 inch rear light-weight alloy wheels with R-compound ultra high-performance tires. Ford Racing front brake ducts help cool the brakes.
The 2012 Laguna Seca Boss 302 comes in two colors – Black or Ingot Silver – with a red roof and red accents. For 2013, color choices include both School Bus Yellow and Black, both with reflective matte silver stripes. A more aggressive front splitter and a larger rear spoiler increase downforce for high speed track use. Only 750 Laguna Seca versions will be built each year for the two-year run (for a total of 1500).
The limited-edition Laguna Seca is designed to bridge the gap between the Boss 302 and the Boss 302R.
Shelby GT500
The 2010 Shelby GT500 was revealed by Ford through a press release on January 1, 2009, prior to a public unveiling at the 2009 North American International Auto Show. Many of the basic design characteristics of the new GT500 are shared with that of the Mustang and Mustang GT. The GT500 gains the same exterior and interior updates as the 2010 Mustang and Mustang GT. The front fascia is new with larger upper and lower grilles, a unique hood, large fog lights mounted in the lower front fascia (similar to the previous GT500), Shelby's signature cobra badges on the grille, front fenders, and trunk lid medallion (with Shelby lettering over the medallion), 19-inch wheels (18-inch on the convertible model), and a Gurney Flap rear spoiler. Inside the GT500 gains a cobra disc on the steering wheel, shift ball, and seats with embroidered cobras.
Mechanically the 2010 Shelby GT500 remains closely related to the 2007–2009 GT500, but the 2010 model has been upgraded with various features similar to or found in the 2008 Shelby GT500KR. A conical cold air intake and other enhancements to the GT500's supercharged 5.4 L DOHC V8 have resulted in an increase in output to 540 bhp (400 kW)@6200rpm and 510 lb·ft (691 N·m)@4500rpm, gains of 40 hp and 30 lb·ft of torque over the 2007–2009 GT500 respectively. TheTremec TR-6060 6-speed manual transmission returns for the 2010 GT500 but has been enhanced with larger clutch discs (250 mm (9.8 in) versus the 215 mm (8.5 in) discs used previously) and other measures to increase performance and noise, vibration, and harshness (NVH) control. Additionally, the fifth and sixth gear ratios of the transmission have been changed from 0.80 to 0.74 and 0.63 to 0.50 respectively, contributing to an improvement in fuel efficiency that the 2010 GT500 enjoys over its predecessor. Complementing the transmission's gear ratio changes is a new, more aggressive 3.55:1 ratio rear axle which replaces the 3.31:1 axle used previously. According to Inside Linei drivers of the new 2010 Shelby can expect 0 to 60 times in 4.3 seconds from a stand still and 4 seconds flat with roll out. Elsewhere, the GT500's aluminum hood, in addition to be stylistically different from that of the Mustang and Mustang GT, features an air extractor that helps cool the engine. Various aerodynamic upgrades, such as the design of the front fascia and the aforementioned Gurney Flap spoiler, contribute to increased downward force and a reduced coefficient of drag. Suspension enhancements found in the GT500KR are used in the 2010 GT500 to improve handling and, specifically, provide better roll control. The 2010 GT500 features Ford's AdvanceTrac traction and stability control system standard with different settings to control the level of performance the driver desires.
The 2010 Shelby GT500 was released in the spring of 2009.
2011 and 2012
For 2011, the Shelby GT500 received significant performance enhancements and other upgrades. Arguably the most important of the GT500's upgrades is a new aluminum engine block for the car's supercharged 5.4 L DOHC V8, replacing the cast-iron block used previously. The block's cylinder bores are coated with an iron and iron oxide composite that is applied with Plasma Transferred Wire Arc (PTWA) technology, which was developed jointly by Ford and Flamespray Industries (www.flame-spray.com). The developers of PTWA received the IPO 2009 National Inventor of the Year award. The coating allows for the replacement of traditional cast-iron cylinder liners and marks Ford's first use of this process. Between this and the use of lighter-weight aluminum for the engine block, the new block is 102 lbs lighter than the previous cast-iron version, contributing to a reduction in the overall weight of the GT500 compared to the 2010 model. Thanks to the new liner coating, which has friction-reducing characteristics, and a revised exhaust, horsepower production from the 5.4 L V8 has increased slightly for a total of 550 bhp (410 kW)@6200rpm. The combination of the lighter engine, EPAS, and aerodynamic enhancements result in an improvement in fuel efficiency for the 2011 GT500 relative to the 2010 model that eliminates the car's gas guzzler tax.
A newly optional SVT Performance Package includes a 3.73:1 rear axle, Goodyear Eagle F1 SuperCar G:2 tires, forged aluminum 19-inch wheels in the front and 20-inch in the rear, as well as a firmer suspension tuning.
The 2011 Shelby GT500 gains the same non-powertrain related upgrades that standard V6 Mustangs and Mustang GTs. New features include standard HID headlights and a glass roof option.
2013
The 2013 Shelby GT500 features 662 hp (494 kW), 631 lb·ft (856 N·m) of torque, and a top speed of 202 mph (325 km/h). The engine is a 5.8L Trinity unit.
The 2013 models gain a new front end sheet metal along with standard HID headlamps, along with a new LED tail light assembly. Performance changes include twin fuel pumps (a Mustang GT’s single supply pump, twice over), larger fuel injectors, a grippier and larger-diameter clutch, a larger fan, a three-row intercooler (the previous car used a double-row unit), a beefed-up Tremec 6060 six-speed with an internal oil pump, and a single-piece carbon-fiber driveshaft. Larger Brembo front disc brakes with six-piston calipers, reinforced axle tubes, and aero tweaks to help the car reach 200+mph safely. Ford says the changes have resulted in a 14-percent reduction in drag and a 66-percent increase in front-end downforce. Also new for 2013 is a larger front anti-roll bar and retuned springs. An rpm-adjustable electronic launch-control function is standard, as is four-mode electronic stability control.
A Performance package is also offered, adding two-mode adjustable Bilstein dampers and a Torsen limited-slip rear differential. In addition to the performance package, a track package for road racing can be ordered bringing a transmission cooler, a nose-mounted differential cooler for the Torsen limited-slip unit, and an air-to-oil engine-oil cooler.
Engines
|
| Mustang (4.0 L V6) | 2005-2010 | 210 hp (157 kW)@5300, 240 lb·ft (325 N·m)@3500 |
| Mustang (3.7 L V6) | 2011-2014 | 305 hp (227 kW)@6500, 280 lb·ft (380 N·m)@4250 |
| Mustang GT (4.6 L V8) | 2010 | 315 hp (235 kW)@6000, 325 lb·ft (441 N·m)@4250 |
| Mustang GT (5.0 L V8) | 2011-2012 | 412 hp (307 kW)@6500, 390 lb·ft (529 N·m)@4250 |
| Mustang GT (5.0 L V8) | 2013-2014 | 420 hp (313 kW)@6500, 390 lb·ft (529 N·m)@4250 |
| Shelby GT500 (5.4 L SC V8) | 2010 | 540 hp (403 kW)@6000, 510 lb·ft (691 N·m)@4800 |
| Shelby GT500 (5.4 L SC V8) | 2011-2012 | 550 hp (410 kW)@6200, 510 lb·ft (691 N·m)@4250 |
| Shelby GT500 (5.8 L SC V8) | 2013-2014 | 662 hp (494 kW)@6250, 631 lb·ft (856 N·m)@4000 |
| Boss 302 (5.0 L V8) | 2012-2013 | 444 hp (331 kW)@7500, 380 lb·ft (515 N·m)@4250 |
Motorsports
Ten Mustangs are currently used in the SCCA World Challenge GTS Series.
Twelve Mustangs are currently used in the Continental Tire Sports Car Challenge Gran Sport class.
A Mustang resembling the Trans Am Series Mustang driven by Parnelli Jones has been entered in the Continental Challenge, tributing the fortieth anniversary of Parnelli's championship.
The Ford Mustang is used in the NASCAR Nationwide Series as a silhouette racing car beginning on July 2, 2010.
Mustangs have also been raced in the FIA GT3 and GT4 championships.
In 2012, Jack Roush won the Daytona International Speedway’s opening race of the 50th Anniversary Rolex 24 At Daytona weekend in a Mustang Boss 302R. Leading the Continental Tire Sports Car Challenge’s final 18 laps, Johnson held off a veritable conga line of six BMW M3’s behind as he closed on the driving pair’s first win of 2012 in the BMW Performance 200 at Daytona.
Yearly American sales
| Year | Sales |
|---|
| 2005 | 160,975 |
| 2006 | 166,530 |
| 2007 | 134,626 |
| 2008 | 91,251 |
| 2009 | 66,623 |
| 2010 | 73,716 |
| 2011 | 70,438 |
| 2012 | 82,995 |
.jpg)
.jpg)
.jpg)
